Picture

RG-S6910-3C – Data Center 100GE High-Density Modular Core Switch (Backward Compatible with 40GE) in the 4-RU Space

16 GB buffer that supports high-performance routing connections, and future evolution to 400GE data center network

Models

RG-S6910-3C

Three Service Slots, and 100GE and 400GE Ports

Datasheet Sales Enquiry

Highlight Features

Various ports, 100GE line cards, and up to 96 x 100GE ports
Hardware-level redundancy, ensuring service continuity
Telemetry-based network monitoring and automated O&M, making management simple and efficient
Support of IPv4/IPv6 dual-stack protocols, providing flexible networking

Ana Teknik Özellikler
Features
Specifications
Resources
Order Information

Sales Enquiry

Ana Teknik Özellikler View More

Features

Data Center 100GE DCI Core Switch RG-S6910-3C

16 GB powerful buffer capability and buffer scheduling mechanism, providing a maximum of 96 x 100GE ports within 4 RU height,
which is suitable for DCI core scenarios in data centers
Support of high-performance routing connections, meeting future expansion needs of data center networks

Ports

Dimensions

Hardware-level Redundancy, Ensuring Service Continuity

Hot-Swappable Redundant Power Modules

Hot-Swappable Redundant Fan Modules

Power modules in 2+2 redundancy mode, hot swapping, and failover in seconds, providing nonstop services

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time,
making network management more efficient and accurate.

Specifications

Hardware Specifications

System Specifications	RG-S6910-3C
Ports	100GE/400GbE ports
Slots	4
Expansion Module Slots	Three expansion slots, each slot supporting the line card with 32 x 100GbE ports or 8 x 400GbE ports
Expansion module	Four power module slots Six fan module slots
Management Port	One management port, one console port, and one USB port
Switching Capacity	19.2 Tbps
Packet Forwarding Rate	4000 Mpps
802.1Q VLAN	4094
Dimensions and Weight
Dimensions (W × D × H)	442 mm x 735 mm × 173.6 mm (17.40 in. x 28.94 in. x 6.83 in.,4 RU)
Weight	About 42 kg (92.59 lbs., including four power modules, six fans, and three subcard modules)
Power Supply and Consumption
AC	● Rated voltage: 110 V AC/ 220 V AC ● Rated voltage range: 100 V AC to 240 V AC, 50 Hz to 60 Hz ● Max voltage range: 90 V AC to 264 V AC, 47 Hz to 63 Hz
High-voltage DC	Input voltage range: 180 V DC to 300 V DC
Maximum Power Consumption	● Max: 2046 W ● Typical: 1092 W ● Static: 760 W
Environment and Reliability
Operating Temperature	0ºC to 40ºC (32ºF to 104ºF)
Storage temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Operating Humidity	10% RH to 90% RH (Non-condensing)
Storage humidity	5% to 95% RH (non-condensing)
Working altitude	Operating altitude: up to 5000 m (16,404.20 ft.) Storage altitude: up to 5000 m (16,404.20 ft.)

Software Specifications

Software Specifications	RG-S6910-3C
Device virtualization	Docker gRPC APIs in Docker
L2 Protocols	IEEE 802.3ae (10GBase), IEEE 802.3ak, IEEE 802.3an, IEEE 802.3x, IEEE 802.3ad (link aggregation), IEEE 802.1p, IEEE 802.1Q, IEEE 802.1D (STP), IEEE 802.1w (RSTP), IEEE 802.1s (MSTP), IGMP Snooping, Jumbo Frame (9 KB), IEEE 802.1ad (QinQ), GVRP
L3 Protocols (IPv4)	BGP4, OSPFv2, RIPv1, RIPv2, MBGP, LPM Routing, Policy-based Routing, Route-policy, ECMP, WCMP, VRRP, IGMP v1/v2/v3, PIM-SSM/SM/DM, MSDP, Any-RP
IPv6 Basic Protocols	Neighbor Discovery, ICMPv6, Path MTU Discovery, DNSv6, DHCPv6, ICMPv6, ICMPv6 redirection, ACLv6, TCP/UDP for IPv6, SNMP v6, Ping/Traceroute v6, IPv6 RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS
IPv6 Features	Static routing, ECMP, PBR, OSPFv3, RIPng, BGP4+, MLDv1/v2, PIM-SMv6, manual tunneling, IPv4 over IPv6 tunneling
Visualization	gRPC sFLOW and IPFIX
Multicast	IGMP Proxy、IGMP v1, v2, v3、IGMP Host Behavior、Querier Election、Member Query and Response、Static Multicast Route、IGMP Fast Leave、IGMP Filter、Layer-2 Multicast Forwarding Without Packet Loss、IGMPv1 and IGMPv2 Snooping、IVGL Mode、Querier、Source IP Address Check、Source Port Check、MLD Proxy、MLD v1 and v2、MLD Snooping、Coping with Traffic Burst Without Packet Loss、Layer-2 Multicast Forwarding Without Packet Loss、Source Port Check、MSDP、PIM-DM、PIM-SMv6、PIM-SSMv6、PIM-SM、PIM-SSM
ACL	ACL 80、Dual-stack Networking、ACL-based Redirection、IPv6 ACL、Standard IP-based ACL、Extended IP-based ACL、Extended MAC-based ACL、Ingress/Egress ACLs、Time-based ACL、Global ACL、ACL Counter、ACL Logging、ACL Re-marking、Displaying ACL Resource Usage、Expert-level ACL
QoS	Mapping of 802.1p, DSCP, and ToS priorities, ACL-based traffic classification, priority marking/remarking, multiple queue scheduling mechanisms available including SP, WFQ, and SP+WRR
Data center features	The MMU queue ID ranges from 0 to 7. Buffer Occupation/Queue Traffic Statistics/Packet Loss Report Through gRPC Flow Suspension Prevention MMU Displaying Lost Packets and Alarms Due to Buffer Congestion on an Interface Real-Time Buffer Monitoring Reading Statistics of Unicast Packet Loss Due to Buffer Congestion Through MIB
HA Design	GR for RIP/OSPF/BGP, BFD, REUP dual-link fast switching and RLDP unidirectional link detection, 1+1 power redundancy and fan redundancy, and hot swap for all cards and power modules
Security Features	Network foundation protection policy, CPP, DDoS attack defense, illegitimate packet detection, data encryption, source IP spoofing prevention, IP scanning prevention, RADIUS/TACACS, IPv4/v6 packet filtering by basic ACL, extended ACL or VLAN-based ACL, plaintext-based and MD5 ciphertext-based authentication for OSPF, RIPv2, and BGPv4 packets, telnet login and password mechanisms for restricted IP addresses, uRPF, broadcast packet suppression
Management Mode	SNMP v1/v2c/v3, telnet, console, MGMT, RMON, SSHv1/v2, FTP/TFTP, NTP, syslog, and SPAN/RSPAN/ERSPAN
Other Protocols	DHCP Client, DHCP Relay, DHCP Server, DNS Client, UDP relay, ARP Proxy, and Syslog

Safety and Regulatory Compliance

Specification	RG-S6910-3C
Safety	● UL 62368-1 ● CSA C22.2 No. 62368-1 ● IEC 62368-1 ● EN 62368-1 ● BS EN 62368-1 ● GB 4943.1
Electromagnetic Compatibility (EMC)	● EN 55032 ● EN 55035 ● EN 61000-3-2 ● EN 61000-3-3 ● BS EN55032 ● BS EN 55035 ● BS EN 61000-3-2 ● BS EN61000-3-3 ● EN 300 386 ● ANSI C63.4 ● 47 CFR FCC Part 15 Subpart B ● ICES-003 Issue 7 ● GB/T 9254.1
Environment	● 2011/65/EU EN 50581 ● 2012/19/EU EN 50419 ● (EC) No.1907/2006 ● GB/T 26572

*For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Order Information

Chassis, Expansion Cards, Fan Modules, and Power Modules

Model	Description
RG-S6910-3C	Three expansion slot, four power module slots, and six fan module slots The power module model is RG-PA1200I-F and the fan model is M2EFAN I-F.
M6900-32CQ	32-port 100GbE card
RG-PA1200I-F	RG-S6910-3C power module, supporting 2+2 redundancy, hot swapping, and front-to-rear ventilation design
M2EFAN I-F	RG-S6910-3C fan module, supporting 5+1 redundancy, hot swapping, and front-to-rear ventilation design

100GBASE Series Optical Modules

Product Model	Description
100G-QSFP-SR-MM850	100G SR module, QSFP28 form factor, MPO, 850 nm, 100 m (328.08 ft.) over MMF
100G-QSFP-iLR4-SM1310	100G iLR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
100G-QSFP-LR4-SM1310	100G LR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 10 km (32,808.40 ft.) over SMF
100G-QSFP-ER4-SM1310	100G ER4 module, QSFP28 form factor, Duplex LC, 1310 nm, 40 km (131,233.59 ft.) over SMF
100G-AOC-5M	100G QSFP28 AOC cable, 5 m (16.40 ft.)
100G-AOC-10M	100G QSFP28 AOC cable, 10 m (32.81 ft.)

40GBASE Series Optical Modules

Product Model	Description
40G-QSFP-iLR4-SM1310	40G iLR4 module, QSFP+ form factor, Duplex LC, 2 km (6,561.68 ft.) over SMF
40G-QSFP-LR4-SM1310	40G LR4 module, QSFP+ form factor, Duplex LC, 10 km (32,808.40 ft.) over SMF
40G-QSFP-LSR-MM850	40G LSR module, QSFP+ form factor, MPO, 400 m (1,312.34 ft.) over MMF
40G-QSFP-SR-MM850	40G SR module, QSFP+ form factor, MPO, 150 m (492.13 ft.) over MMF
40G-QSFP-LX4-SM1310	40G LX4 module, QSFP+ form factor, Duplex LC connector, 150 m (492.13 ft.) over OM3/OM4 MMF, or 2 km (6,561.68 ft.) over SMF
40G-AOC-30M	40G QSFP+ AOC cable, 30 m (98.43 ft.)
40G-AOC-5M	40G QSFP+ AOC cable, 5 m (16.40 ft.)

RG-S6910-3C – Data Center 100GE High-Density Modular Core Switch (Backward Compatible with 40GE) in the 4-RU Space

Various ports, 100GE line cards, and up to 96 x 100GE ports

Hardware-level redundancy, ensuring service continuity

Telemetry-based network monitoring and automated O&M, making management simple and efficient

Support of IPv4/IPv6 dual-stack protocols, providing flexible networking

Data Center 100GE DCI Core Switch RG-S6910-3C

16 GB powerful buffer capability and buffer scheduling mechanism, providing a maximum of 96 x 100GE ports within 4 RU height,which is suitable for DCI core scenarios in data centersSupport of high-performance routing connections, meeting future expansion needs of data center networks