Port specifications

RG-S6110-24MG4VS-UP

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

Fixed service port

24 x 100/1000/2.5G/5GBASE-T ports, supporting PoE/PoE+/PoE++

4 x 10GE/25GE SFP28 ports

24 x 100/1000/2.5G/5G/10GBASE-T ports, supporting PoE/PoE+/PoE++

4 x 1GE/10GE SFP+ ports

4 x 10GE/25GE SFP28 ports

48 x 100/1000/2.5G/5GBASE-T ports

● Ports 1 to 24 support PoE/PoE+/PoE++

● Ports 25 to 48 support PoE/PoE+

4 x 10GE/25GE SFP28 ports

2 x 40GE QSFP+ ports

48 x 100/1000/2.5G/5G/10GBASE-T ports

● Ports 1 to 24 support PoE/PoE+/PoE++

● Ports 25 to 48 support PoE/PoE+

4 x 10GE/25GE SFP28 ports

2 x 40GE QSFP+ ports

Module slot

Not Supported

2 x power module slots

3 x fan module slots

Power module

Not Supported

RG-PA600I-P-F

RG-PA1000I-P-F

Fan module

Not Supported

M2SFAN I-F (pre-installed 3)

Fixed management port

1 x RJ45 console port

1 x RJ45 MGMT port

USB

1 x USB 2.0 port

System specifications

RG-S6110-24MG4VS-UP

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

System packet forwarding rate *1

392 Mpps

678 Mpps

750 Mpps

982 Mpps

System switching capacity *2

528 Gbps

912 Gbps

1008 Gbps

1320 Gbps

CPU

Single-core CPU, with the clock speed of 1.2 GHz

Real-time clock (RTC)

Supported

BootROM

16 MB

Flash memory

1 GB

Memory

1 GB DDR4 (32-bit width, 4-bit ECC)

1 GB DDR4 (32-bit width, 4-bit ECC)

2 GB DDR4 (32-bit width, 4-bit ECC)

2 GB DDR4 (32-bit width, 4-bit ECC)

Switch buffer

4 MB

Number of MAC addresses

Number of global MAC addresses: 32,768

Number of static MAC addresses: 1,000

ARP table size

16,000

ND table size

4,000

Number of IPv4 unicast routes

16,000

Number of IPv4 multicast routes

4,000

Number of IPv6 unicast routes

16,000

Number of IPv6 multicast routes

2,000

Number of IGMP groups

4,000

Number of MLD groups

1,000

Number of ACEs

Ingress: 2,500

Egress: 1,000

Number of VSU members

2

Power supply and consumption

RG-S6110-24MG4VS-UP

Power supply

1 x fixed power supply

Power input

AC input:

● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz

● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 6 A

Maximum output power

Fixed power supply: 460 W

PoE port

Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply

PoE power cable pairs

Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)

PoE output power

Each PoE port provides up to 90 W of power.

The maximum power is 370 W.

Note: The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device.

Maximum power consumption

90 W (without PoE)

460 W (full PoE load)

Power supply and consumption

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

Power supply

2 x pluggable power modules

Power input

RG-PA600I-P-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz

● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 8 A

RG-PA1000I-P-F (AC input 1):

● Rated input voltage: 100 V AC to 130 V AC, 50/60 Hz

● Maximum input voltage: 90 V AC to 143 V AC, 47 Hz to 63 Hz

● Maximum input current: 12 A

RG-PA1000I-P-F (AC input 2):

● Rated input voltage: 200 V AC to 240 V AC, 50/60 Hz

● Maximum input voltage: 180 V AC to 264 V AC, 47 Hz to 63 Hz

● Maximum input current: 8 A

Maximum output power

RG-PA600I-P-F: 600 W

RG-PA1000I-P-F:

● 100 V AC to 130 V AC: 930 W

● 200 V AC to 240 V AC: 1000 W

PoE port

Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply

Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply

Ports 25 to 48 support PoE/PoE+ (IEEE 802.3af/at) power supply

PoE power cable pairs

Four pairs (1-2, 3-6, 4-5, and 7-8 pairs)

PoE output power

Each PoE port provides up to 90 W of power

The maximum power depends on the configured power supply

● 1 x RG-PA600I-P-F：450 W

● 1 x RG-PA1000I-P-F: 760 W (100 V AC to 130 V AC)

● 1 x RG-PA1000I-P-F: 850 W (200 V AC to 240 V AC)

● 2 x RG-PA600I-P-F：930 W

● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1200 W (100 V AC to 130 V AC)

● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1290 W (200 V AC to 240 V AC)

● 2 x RG-PA1000I-P-F: 1470 W (100 V AC to 130 V AC)

● 2 x RG-PA1000I-P-F: 1650 W (200 V AC to 240 V AC)

Each port of ports 1 to 24 provides up to 90 W of power

Each port of ports 25 to 48 provides up to 30 W of power

The maximum power depends on the configured power supply

● 1 x RG-PA600I-P-F：400 W

● 1 x RG-PA1000I-P-F: 710 W (100 V AC to 130 V AC)

● 1 x RG-PA1000I-P-F: 800 W (200 V AC to 240 V AC)

● 2 x RG-PA600I-P-F：880 W

● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1150 W (100 V AC to 130 V AC)

● 1 x RG-PA600I-P-F + 1 x RG-PA1000I-P-F：1240 W (200 V AC to 240 V AC)

● 2 x RG-PA1000I-P-F: 1420 W (100 V AC to 130 V AC)

● 2 x RG-PA1000I-P-F: 1600 W (200 V AC to 240 V AC)

Maximum power consumption

150 W (without PoE load)

1,800 W (full PoE load)

200 W (without PoE load)

1,800 W (full PoE load)

Dimensions and weight

RG-S6110-24MG4VS-UP

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

Unit dimensions (W x D x H)

442.0 mm x 220.0 mm x 43.6 mm (17.40 in. x 8.66 in. x 1.72 in.)

442.0 mm x 420.0 mm x 43.6 mm (17.40 in. x 16.54 in. x 1.72 in.)

Shipping dimensions (W x D x H)

568 mm x 366 mm x 226 mm (22.36 in. x 14.41 in. x 8.90 in.)

563 mm x 563 mm x 210 mm (22.17 in. x 22.17 in. x 8.27 in.)

Rack height

1 RU

1 RU

Unit weight

3.71 kg (8.18 lbs)

5.86 kg (12.92 lbs, with 3 fan modules)

6.18 kg (13.62 lbs, with 3 fan modules)

6.18 kg (13.62 lbs, with 3 fan modules)

Shipping weight

5.37 kg (11.84 lbs)

8.12 kg (17.90 lbs, with 3 fan modules)

8.42 kg (18.56 lbs, with 3 fan modules)

8.42 kg (18.56 lbs, with 3 fan modules)

Environment and reliability

RG-S6110-24MG4VS-UP

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

Temperature

Operating temperature: 0°C to 45°C (32°F to 113°F)

Storage temperature: -40°C to +70°C (-40°F to +158°F)

Note: At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 10% to 90% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Altitude

Operating altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.)

Storage altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.)

Mean time between failure (MTBF)

194,296 hours (about 22 years)

194,296 hours (about 22 years)

236,695 hours (about 27 years)

236,695 hours (about 27 years)

Fan

2 x fixed fan modules

3 x pluggable fan modules

Heat dissipation

Fan cooling, left-to-right and front-to-right airflow

Fan cooling, left-to-rear and front-to-rear airflow

Acoustic noise

27°C (80.6°F): 40 dB

Maximum value: < 78 dB

27°C (80.6°F): 60 dB

Maximum value: < 78 dB

Power module redundancy

Not supported

1+1 redundancy

1+1 redundancy

1+1 redundancy

Fan redundancy

Not supported

2+1 redundancy

2+1 redundancy

2+1 redundancy

Power module hot swapping

Supported

USB hot swapping

Supported

Cable hot swapping

Supported

Power supply monitoring

Not supported

Monitoring of the power supply model and status

Power supply failure alarming

Fan monitoring

Automatic speed adjustment

Fan failure alarming

Temperature monitoring

Supported

ESD

ESD contact/air discharge: 6 kV/8 kV

ESD susceptibility contact/air discharge: 8 kV/15 kV

Surge protection

MGMT port: 4 kV

Service port: 8 kV

Power port: common mode 6 kV, differential mode 6 kV

Certifications and regulatory compliance

RG-S6110-24MG4VS-UP

RG-S6120-24XMG4XS4VS-UP-H

RG-S6110-48MG4VS2QXS-UP

RG-S6120-48XMG4VS2QXS-UP-H

Safety regulation

IEC 62368-1

EMC regulation

EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

RoHS

European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Feature

RG-S6100 Series

Ethernet switching

Jumbo frame (maximum length: 9,216 bytes)

IEEE 802.1Q (supporting 4K VLANs)

Maximum number of VLANs that can be created: 4,094

Voice VLAN

Super-VLAN and private VLAN

MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment

GVRP

Basic QinQ and selective QinQ

STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

ERPS (G.8032)

LACP (IEEE 802.3ad)

LLDP/LLDP-MED

IP service

Static and dynamic ARP

DHCP server, DHCP client, DHCP relay, and DHCP snooping

DNS

DHCPv6 server, DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping

Neighbor Discovery (ND) and ND snooping

IP routing

Static routing

RIP and RIPng

OSPFv2 and OSPFv3

GR

IS-ISv4 and IS-ISv6

BGP4 and BGP4+

Equal and Weighted Cost Multi-Path (ECMP)

Packet-based and flow-based load balancing

Stateless Auto Configuration

IPv4/IPv6 VRF

IPv4/IPv6 PBR

Multicast

IGMPv1/v2/v3 and IGMP proxy

IGMPv1/v2/v3 snooping

IGMP filtering and IGMP fast leave

PIM-DM, PIM-SM, and PIM-SSM

PIM-SSM for IPv4 and IPv6

MSDP to achieve inter-domain multicast

MLDv1/v2

MLD snooping

MSDP

PIM-SMv6

Multicast source IP address check

Multicast source port check

Multicast querier

ACL and QoS

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

Time-based ACLs

ACL80 and IPv6 ACL

Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL redirection

Port traffic identification

Port traffic rate limiting

802.1p/DSCP/ToS traffic classification

Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences

Traffic classification based on ToS values

Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ

Congestion avoidance: tail drop, RED, and WRED

Eight queues on each port

Rate limiting in each queue

Security

Multi-AAA

RADIUS and TACAS+

Filtering of invalid MAC addresses

Broadcast storm suppression

Hierarchical management of administrators and password protection

BPDU guard

RADIUS authentication and authorization

Port- and MAC address-based 802.1x authentication

IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication

Web authentication

Hypertext Transfer Protocol Secure (HTTPS)

SSHv1 and SSHv2

Global IP-MAC binding

ICMPv6

Port security

IP source guard

SAVI

ARP spoofing prevention

CPP and NFPP

Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types

Loose and strict RPF

uRPF ignoring default routes

Reliability

REUP

ERPS (G.8032)

Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control

Data Link Detection Protocol (DLDP)

IPv4 VRRP v2/v3 and IPv6 VRRP

BFD

GR for RIP, OSPF, and BGP

Power modules in 1+1 redundancy mode

Hot swapping of power modules and fan modules (not supported by the RG-S6110-24MG4VS-UP)

Device virtualization

VSU

NMS and maintenance

SPAN, RSPAN, and ERSPAN

sFlow

NTP and SNTP

FTP and TFTP

SNMP v1/v2/c3

RMON (1, 2, 3, 9)

Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups

RMON used to implement Ethernet statistics, historical statistics, and alarm functions

NETCONF

Flow-based mirroring, and N:1 and 1:N port mirroring

CWMP

gRPC

OpenFlow Special 1.3

Flow table analysis defined by all protocols

Transmission of specified packets to the controller

Configuring the controller's IP address and port

Notifying port status changes to the controller

CLI (Telnet/console), SSH, Syslog, SNMP over IPv6, Telnet v6, FTP/TFTP v6, DNS v6, and NTP for IPv6

Ruijie Could-based management